The Event Tickets and Registration plugin for WordPress is vulnerable to unauthorized modification of data due to a missing capability check on the Stripe OAuth return endpoint in all versions up to, and including, 5.27.4. This makes it possible for unauthenticated attackers to overwrite the site's Stripe merchant credentials (access tokens, publishable keys, and account ID), diverting all subsequent payment processing to the attacker's Stripe account.

In the Linux kernel, the following vulnerability has been resolved: comedi: ni_atmio16d: Fix invalid clean-up after failed attach If the driver's COMEDI "attach" handler function (`atmio16d_attach()`) returns an error, the COMEDI core will call the driver's "detach" handler function (`atmio16d_detach()`) to clean up. This calls `reset_atmio16d()` unconditionally, but depending on where the error occurred in the attach handler, the device may not have been sufficiently initialized to call `reset_atmio16d()`. It uses `dev->iobase` as the I/O port base address and `dev->private` as the pointer to the COMEDI device's private data structure. `dev->iobase` may still be set to its initial value of 0, which would result in undesired writes to low I/O port addresses. `dev->private` may still be `NULL`, which would result in null pointer dereferences. Fix `atmio16d_detach()` by checking that `dev->private` is valid (non-null) before calling `reset_atmio16d()`. This implies that `dev->iobase` was set correctly since that is set up before `dev->private`.

In the Linux kernel, the following vulnerability has been resolved: comedi: me_daq: Fix potential overrun of firmware buffer `me2600_xilinx_download()` loads the firmware that was requested by `request_firmware()`. It is possible for it to overrun the source buffer because it blindly trusts the file format. It reads a data stream length from the first 4 bytes into variable `file_length` and reads the data stream contents of length `file_length` from offset 16 onwards. Although it checks that the supplied firmware is at least 16 bytes long, it does not check that it is long enough to contain the data stream. Add a test to ensure that the supplied firmware is long enough to contain the header and the data stream. On failure, log an error and return `-EINVAL`.

In the Linux kernel, the following vulnerability has been resolved: comedi: me4000: Fix potential overrun of firmware buffer `me4000_xilinx_download()` loads the firmware that was requested by `request_firmware()`. It is possible for it to overrun the source buffer because it blindly trusts the file format. It reads a data stream length from the first 4 bytes into variable `file_length` and reads the data stream contents of length `file_length` from offset 16 onwards. Add a test to ensure that the supplied firmware is long enough to contain the header and the data stream. On failure, log an error and return `-EINVAL`. Note: The firmware loading was totally broken before commit ac584af59945 ("staging: comedi: me4000: fix firmware downloading"), but that is the most sensible target for this fix.

In the Linux kernel, the following vulnerability has been resolved: s390/zcrypt: Fix memory leak with CCA cards used as accelerator Tests showed that there is a memory leak if CCA cards are used as accelerator for clear key RSA requests (ME and CRT). With the last rework for the memory allocation the AP messages are allocated by ap_init_apmsg() but for some reason on two places (ME and CRT) the older allocation was still in place. So the first allocation simple was never freed.

In the Linux kernel, the following vulnerability has been resolved: reset: gpio: fix double free in reset_add_gpio_aux_device() error path When __auxiliary_device_add() fails, reset_add_gpio_aux_device() calls auxiliary_device_uninit(adev). The device release callback reset_gpio_aux_device_release() frees adev, but the current error path then calls kfree(adev) again, causing a double free. Keep kfree(adev) for the auxiliary_device_init() failure path, but avoid freeing adev after auxiliary_device_uninit().

In the Linux kernel, the following vulnerability has been resolved: PM: EM: Fix NULL pointer dereference when perf domain ID is not found dev_energymodel_nl_get_perf_domains_doit() calls em_perf_domain_get_by_id() but does not check the return value before passing it to __em_nl_get_pd_size(). When a caller supplies a non-existent perf domain ID, em_perf_domain_get_by_id() returns NULL, and __em_nl_get_pd_size() immediately dereferences pd->cpus (struct offset 0x30), causing a NULL pointer dereference. The sister handler dev_energymodel_nl_get_perf_table_doit() already handles this correctly via __em_nl_get_pd_table_id(), which returns NULL and causes the caller to return -EINVAL. Add the same NULL check in the get-perf-domains do handler. [ rjw: Subject and changelog edits ]

In the Linux kernel, the following vulnerability has been resolved: nvmem: zynqmp_nvmem: Fix buffer size in DMA and memcpy Buffer size used in dma allocation and memcpy is wrong. It can lead to undersized DMA buffer access and possible memory corruption. use correct buffer size in dma_alloc_coherent and memcpy.

In the Linux kernel, the following vulnerability has been resolved: vt: discard stale unicode buffer on alt screen exit after resize When enter_alt_screen() saves vc_uni_lines into vc_saved_uni_lines and sets vc_uni_lines to NULL, a subsequent console resize via vc_do_resize() skips reallocating the unicode buffer because vc_uni_lines is NULL. However, vc_saved_uni_lines still points to the old buffer allocated for the original dimensions. When leave_alt_screen() later restores vc_saved_uni_lines, the buffer dimensions no longer match vc_rows/vc_cols. Any operation that iterates over the unicode buffer using the current dimensions (e.g. csi_J clearing the screen) will access memory out of bounds, causing a kernel oops: BUG: unable to handle page fault for address: 0x0000002000000020 RIP: 0010:csi_J+0x133/0x2d0 The faulting address 0x0000002000000020 is two adjacent u32 space characters (0x20) interpreted as a pointer, read from the row data area past the end of the 25-entry pointer array in a buffer allocated for 80x25 but accessed with 240x67 dimensions. Fix this by checking whether the console dimensions changed while in the alternate screen. If they did, free the stale saved buffer instead of restoring it. The unicode screen will be lazily rebuilt via vc_uniscr_check() when next needed.

In the Linux kernel, the following vulnerability has been resolved: counter: rz-mtu3-cnt: prevent counter from being toggled multiple times Runtime PM counter is incremented / decremented each time the sysfs enable file is written to. If user writes 0 to the sysfs enable file multiple times, runtime PM usage count underflows, generating the following message. rz-mtu3-counter rz-mtu3-counter.0: Runtime PM usage count underflow! At the same time, hardware registers end up being accessed with clocks off in rz_mtu3_terminate_counter() to disable an already disabled channel. If user writes 1 to the sysfs enable file multiple times, runtime PM usage count will be incremented each time, requiring the same number of 0 writes to get it back to 0. If user writes 0 to the sysfs enable file while PWM is in progress, PWM is stopped without counter being the owner of the underlying MTU3 channel. Check against the cached count_is_enabled value and exit if the user is trying to set the same enable value.

In the Linux kernel, the following vulnerability has been resolved: counter: rz-mtu3-cnt: do not use struct rz_mtu3_channel's dev member The counter driver can use HW channels 1 and 2, while the PWM driver can use HW channels 0, 1, 2, 3, 4, 6, 7. The dev member is assigned both by the counter driver and the PWM driver for channels 1 and 2, to their own struct device instance, overwriting the previous value. The sub-drivers race to assign their own struct device pointer to the same struct rz_mtu3_channel's dev member. The dev member of struct rz_mtu3_channel is used by the counter sub-driver for runtime PM. Depending on the probe order of the counter and PWM sub-drivers, the dev member may point to the wrong struct device instance, causing the counter sub-driver to do runtime PM actions on the wrong device. To fix this, use the parent pointer of the counter, which is assigned during probe to the correct struct device, not the struct device pointer inside the shared struct rz_mtu3_channel.